-
The hook with a bend for the Slatboard Panel is the top choice for all types of stores. You can display jewelry, blister-packaged products (batteries, slippers, candles, ceremonial candles, socks, etc.), nylon bags, household equipment (pans, ladles, etc.), hobby items (beads, paints) - camping gear, and any accessory a store wishes to showcase effectively. The Slatboard metal accessories are readily available in all sizes, in HQ (High Quality) chrome (nickel). Alternatively, please specify your desired RAL code. *Note: Chrome (nickel) is the optimal solution for daily use due to minimal wear, unlike electrostatic paint which shows alterations over time and with use.* Cross-section: 6mm Finish: High Quality (HQ) Chrome - Glossy (Nickel) Protective cap: Black rubber (easily removable) For optimal protection of your products (jewelry, etc.), please refer below to the plastic lock from the - Suggested Products option. -
Reinforced Leveling Foot with special Threaded Plug for iHandle column. The height of the leveling foot, including the plug, when fully tightened, is 27mm (2.7cm). An essential component for the iHandle column, it helps you level the columns regardless of your floor's evenness. Screw thread length: 70mm Usable leveling foot height: 50mm Leveling foot height (fully tightened): 27mm Installation Instructions: 1) Place two rosettes on the column with the hooks facing the ground and not towards the ceiling. Tap lightly with a hammer to secure them. 2) Insert the threaded part into the column by tapping lightly with a hammer, then screw the leveling foot onto the threads. 3) Position the column against the wall, adjust the leveling foot as needed, and mark the rosette holes with a pencil. 4) Remove the column and drill. 5) Install the appropriate wall plugs (for plasterboard or solid wall). 6) Reinstall the column with the rosettes and screw into the installed wall plugs. Note: This specific iHandle 40*40 system is an optimal solution for increased loads, as the loads are transferred to the floor, not the wall. -
Wall-mounted Starter Unit Supermarket Shelving 0.40 x 1.00 x 2.40m (Depth x Length x Height), of European manufacture and specifications, made of steel, painted in RAL 9002, with the ability to hang metal shelves and many other accessories for equipping your store, mini market, supermarket, convenience store, or even pharmacy, and much more. Supermarket shelving, designed for heavy-duty product display, offers great flexibility in moving suspended accessories due to the dense perforation on the metal uprights (25mm perforation pitch). At the same time, it allows for cladding with synthetic melamine of your choice, combining increased functionality with your desired aesthetic. !!! Note - Buying Guide !!! For each layout - wall you wish to cover, you must:- First, add Starter Units from the available length options to achieve the desired final length, and
- Then, add the Extra Required Finishing in your desired Depth (you will find it in the Recommended products)
- Upright 2415mm - One (1)
- Foot (depth: 400mm) - One (1)
- Screw for connecting foot to upright - One (1)
- Back Panel 400mm height - Two (2)
- Back Panels 500mm height - Three (3)
- Shelf - One (1)
- Price Profile - One (1)
- Base Plinth - One (1)
-
Wall-mounted Starter Unit Supermarket Shelving 0.40 x 1.25 x 2.40m (Depth x Length x Height), of European manufacture and specifications, constructed from steel, painted in RAL 9002, with the capability to hang metal shelves and many other accessories for equipping your store, mini market, supermarket, convenience store shelving, and even pharmacies, among many others. Supermarket shelving, designed for heavy-duty product display, offers great flexibility in repositioning hanging accessories due to the dense perforations on its metal uprights (perforation pitch 25mm). Simultaneously, it provides the option for cladding with synthetic melamine of your choice, allowing you to combine enhanced functionality with your desired aesthetic. !!! Note - Buying Guide !!! For each layout - wall you wish to cover, you will need to:
- First, add Starter Units from the available length options to achieve the desired final length, and
- Then, add the Required End Finishing Construction in your desired Depth (you will find it in the Recommended Products).
- Upright 2415mm - One (1)
- Foot (depth: 400mm) - One (1)
- Screw for connecting foot to upright - One (1)
- Back panel 400mm height - Two (2)
- Back panels 500mm height - Three (3)
- Shelf - One (1)
- Price profile - One (1)
- Base plinth - One (1)
-
Wall-Mounted Supermarket Shelving Unit 0.30x1.33x2.40m (Depth x Length x Height) with five (5) shelves, of European manufacture and specifications, constructed from steel, painted in RAL 9002, with the ability to mount metal shelves and many other accessories for equipping your store, mini market, supermarket, convenience store, or even pharmacy, and much more. Supermarket shelves, designed for heavy-duty product display, offer great flexibility for repositioning accessories due to the dense perforation on the metal uprights (perforation pitch 25mm). Simultaneously, they allow for cladding with synthetic melamine of your choice to combine increased functionality with your desired aesthetic. * Initial Unit Height: 2415mm ** Finish: RAL 9002 Paint *** Perforation Pitch: 25mm ****End leg included Materials for one (1) Wall-Mounted Unit included in the package:- Upright 2415mm - Two (2)
- Foot (depth: 300mm) - Two (2)
- Screw for connecting foot to upright - Two (2)
- Back Panel 400mm height - Two (2)
- Back Panels 500mm height - Three (3)
- Shelf (base included) - Six (6)
- Shelf Bracket (length: 30cm) - Ten (10)
- Price Profile - Six (6)
- Base Plinth - One (1)
-
Wall-Mounted Supermarket Shelving Unit 0.50x1.33x1.80m (Depth x Length x Height) with two (2) shelves, of European manufacture and specifications, made of steel, painted in RAL 9002. It offers the possibility of hanging metal shelves and many other accessories for equipping your store, mini market, supermarket, convenience store shelves, and even pharmacies, among many others. Supermarket shelving units are highly durable for displaying heavy products and offer great flexibility in repositioning accessories due to the dense perforations on their metal uprights (perforation pitch 25mm). Simultaneously, they allow for cladding with synthetic melamine of your choice, combining increased functionality with your desired aesthetic. * Initial Unit Height: 1815mm ** Finish: RAL 9002 Paint *** Perforation Pitch: 25mm ****Closing base included Materials for one (1) Wall-Mounted Unit included in the package:- Upright 1815mm - Two (2)
- Foot (depth: 500mm) - Two (2)
- Screw for connecting foot to upright - Two (2)
- Back Panel 400mm height - Three (3)
- Back Panels 500mm height - One (1)
- Shelf (base included) - Three (3)
- Shelf Bracket (length: 50cm) - Four (4)
- Price Profiles - Three (3)
- Baseboard - One (1)
-
Wall Mounting Flange in the color of your choice. An essential component for securing the perforated column - upright is the flange, which will be screwed to the wall or plasterboard. Flange Diameter: 65mm Distance from Wall: 20mm Installation Instructions: 1) Place two flanges on the column with the hooks facing the ground and not towards the ceiling. Tap lightly with a hammer to secure them. 2) Place the threaded rod into the column by tapping lightly with a hammer, then screw the adjuster onto the threads of the rod. 3) Position the column on the wall, adjust the regulator according to your needs, and mark the holes of the flange with a pencil. 4) Remove the column and drill. 5) Insert the appropriate wall plugs (for plasterboard or solid wall). 6) Re-position the column with the flanges and screw into the installed wall plugs. Note: This specific iHandle 40*40 system is an optimal solution even for increased loads, as the loads are transferred to the floor and not to the wall. -
This undoubtedly represents the evolution in the Panels systems category. Perforated aluminum columns - rods are the most economical solution for store furnishing, offering great flexibility and a wide range of accessories for every need. Its key strengths include: Ease of installation, flexibility in vertically adjusting accessories every 2.5 cm (such as shelves, hanging displays, and display bars with pins), and easy, quick interchangeability of various wooden panels or even illuminated Plexiglas (depending on the store's style and type). It is the top choice for clothing stores, pharmacies, cosmetics, sporting goods, electrical goods, and accessories.Note: This specific profile is the optimal and quick solution for installation in the "U" metal substructure of plasterboard, allowing us the flexibility to clad the wall with plasterboard and then apply any painting technique. It is also suitable for constructing wooden central furniture (gondolas). Manufactured by SAVVOPOULOS Shop Fitting with certified strong aluminum profiles. Dimension: 2400mm Back Panel Thickness: 18-19mm Perforation Pitch: 25/50 Column Face: 7.65mm Finish: Aluminum Wall Installation - Brick or Plasterboard: With wall plugs and screws. Wooden Surface Installation: With chipboard screws. Painting Option: Electrostatic painting in a Ral code of your indication. -
Metal column with base for Supermarket Shelf, 2.40m high, European construction and specifications, made of steel, painted in RAL 9002, with the ability to hang metal shelves and many other accessories for equipping your store, mini market, supermarket, convenience store shelves, and even pharmacies, among many others. Supermarket shelving, designed for heavy-duty product display, offers exceptional flexibility for repositioning suspended components thanks to the dense perforation on its metal columns (perforation pitch 25mm). Simultaneously, it allows for cladding with synthetic melamines of your choice to combine increased functionality with your desired aesthetic. * Column Height: 2415mm ** Finish: RAL 9002 Paint *** Perforation Pitch: 25mm !!! Note - Buying Guide !!! For each layout - wall you wish to cover, you will need to:- First, add from the available length options for Starter Units to achieve the desired final length, and
- Then, add the Extra Required End Finishing in your desired Depth (you will find it in the Recommended Products)
- Column 2415mm - One (1)
- Base (in the desired depth) - One (1)
- Screw for connecting base to column - One (1)
-
Metal Supermarket Shelf, of European construction and specifications, manufactured from sheet metal with strong brackets and ribs on the underside for high load resistance. Suitable for equipping Supermarkets, Mini Markets, Convenience Stores, retail stores, pet shops and veterinary clinics, pharmacies, and more. Our Supermarket Shelves are designed for heavy-duty product display, offering significant flexibility for repositioning suspended accessories thanks to the dense perforation on their metal columns (25mm perforation pitch). Additionally, they allow for cladding with synthetic melamine of your choice, enabling you to combine enhanced functionality with your desired aesthetic. Finally, the brackets included with our Supermarket Shelves allow you to position them at 0º inclination as well as 15º inclination due to the notches on the back of the bracket. * Finish: RAL 9002 Paint Materials included for one (1) Shelf in the package:- Shelf - One (1)
- Brackets - Two (2)
- Price Profile - One (1)
-
The Hidro System pipe is the structural core, as its materials and construction method allow for the suspension of clothing loads without any issues. It is a galvanized pipe, Φ35 diameter, with a transparent varnish to maintain its "rock" aesthetic. The Hidro system is a new, Italian design that challenges traditional store shelving. It allows for any desired composition using available connectors, meeting the needs of even the most demanding store designs. Due to its design, the Hidro system can fulfill the design requirements of youth clothing stores, store shelving, and furniture for clothing stores catering to both young and older demographics. Diameter: Φ34 Material: Galvanized Pipe Length: 3000mm (3 meters) -
Global slotted upright, with double "H" slotting. The Global upright is the most economical and fastest solution for equipping commercial stores and beyond. Various accessories can be attached, such as wooden shelves, glass shelves, hanging rails, shelf-and-hanging units, display bars, and direct display options. Its advantage lies in its DIY (do-it-yourself) installation, combined with the optional wooden back panel. Furthermore, the upright and its accessories are readily available in HQ (High Quality) chrome. Alternatively, please specify your desired RAL code. It can also be clad with decorative wooden frames or a wooden back panel to achieve a richer and more complete aesthetic. *Note: Chrome (Nickel) is the optimal solution for daily use due to minimal wear.Design: Innovative design with "H" slotting Dimension: 2.4 m Slotting Pitch: 2.50 cm / 5.0 cm (European standards) Finish: High Quality (HQ) Chrome - Glossy (Nickel) Suitable for: Clothing stores, shoe stores, changing rooms, pharmacies, cosmetic stores, commercial store warehouses, hobby shops, camping stores, bicycle shops, gyms, jewelry stores, mini markets, convenience stores, etc.
