A 40×40 slotted post with enhanced durability, as loads are transferred to the floor, combined with wall-mounting rosettes for proper installation. An ideal solution for clothing, sporting goods, and footwear stores, as well as for heavy loads. Installation is straightforward, requiring only the adjustment of the regulator and then screwing in the wall-mounting rosettes. Key advantages of the iHandle system include its durability, the option for custom painting, and the wide range of available accessories.

Our technical department recommends two (2) rosettes per post.

Cross-section: 40x40x2 mm

Post Height: 2400mm or 3000mm + 30mm for the regulator

Installation Instructions:

1) Place two rosettes on the post with the hooks facing downwards, not towards the ceiling. Tap lightly with a hammer to secure them.

2) Place the threaded insert into the post by tapping lightly with a hammer, then screw the regulator onto the threads.

3) Position the post against the wall, adjust the regulator to your needs, and mark the rosette holes with a pencil.

4) Remove the post and drill the holes.

5) Insert the appropriate wall plugs (for plasterboard or solid wall).

6) Re-position the post with the rosettes and screw it into the installed wall plugs.

Note: This specific iHandle 40*40 system is an optimal solution even for increased loads, as the loads are transferred to the floor, not the wall.

* Regulator not included
** Mounting rosettes not included. Please select two (2) pieces per post.